Material Color Code for Hammer -- Echo Machinery
2024-04-19
Using the wrong hammers may not only waste of money but also can damage your crusher rotor, so it's very important to select the right material for your hammers.
We are glad to
share our new material color code with you, please check below picture.
We will help you to select the most suitable material for your hammers based on
your specific applications. In this way, our hammers will effectively lower the
breakage rate, protect your crusher rotor and increase the crushing tons.
If you have any interest, please feel free to contact us.
|
Blow Bar Hammer Material Selection Form |
|||||||
|
Material Code |
Color |
Content |
Recommended |
Typical |
Max.iron bar |
Estimated Material |
|
|
ECHO1 |
Grey |
martensitic steel with Master |
≤65cm |
Concrete |
40% |
1 time |
|
|
ECHO2 |
Green |
martensitic steel with Max. |
≤45cm |
10% |
Around 1.15 times |
||
|
ECHO3 |
Blue |
martensitic steel with Max.Pro |
≤30cm |
Contact Us |
5% |
Around 1.3times |
|
|
ECHO4 |
Cyan |
middle chrome with Master |
≤45cm |
Contact Us |
5% |
Around 1.8times |
|
|
ECHO5 |
Red |
white iron with Master Ceramic |
≤35cm |
Asphalt or |
0% |
Around 2 times |
|
|
ECHO6 |
Purple |
white iron Metel with Master |
≤45cm |
Natural stone |
5% |
Around 1.6 times |
|
|
ECHO7 |
Orange |
white iron with Max. Pro Master |
≤20cm |
Contact Us |
0% |
Around 2.4 times |
|
|
ECHO8 |
Yellow |
middle Chrome white iron only |
≤35cm |
Asphalt or |
0% |
Around 0.75 times |
|
|
ECHO9 |
Yellow |
high chrome white iron only |
≤35cm |
Asphalt or |
0% |
Around 0.85 times |
|
|
ECHO10 |
Black |
martensitic only |
≤45cm |
Concrete |
30% |
Around 0.5 times |
|
|
Expert of Wear-Resistant Material Since 2003 |
|||||||